Milwaukee 6497-6 10 in. Magnum Slide Compound Miter Saw
Usually ships within 48 hours shortening time between cuts. Standard Equipment includes a 80 tooth Carbide Blade, blade wrench, Extension with stops, Vise, and Dust Bag. Powerful 15 amp motor, 4800 RPMLarge cutting capacity: crosscut up to 3-1/2 inch x 12 inch Cut 3-7/16 inch x 8-3/4 inch at 45 degree miter. Cut 2-1/8 inch x 8-3/4 inch at 45 degrees x 45 degrees compound.Wide Miter Angles from 51 degrees left to 59 degrees right. Positive Stops at 0, 15, 22.5, 30 and 45 degrees left and rightBevels Angles from 48 degrees left and 3 degrees right. Positive bevel stops at 0 degrees and 45 degrees.This 10 inch Magnum Sliding Compound Miter Saw offers a unique override mechanism which allows fine tuned adjustments to the pre-set miter angle for precision cutting. Pre-set positive stops are set at 0 degrees, 15 degrees, 22.5 degrees, 30 degrees and 45 degrees both left and right. Bevel Angles from 48 degrees left to 3 degrees right with the non-slip locking system. Miter Angles from 51 degrees left to 59 degrees right. Miter table rotates on roller bearings for smooth positive miter settings. Hardened steel tubes provide a smooth sliding surface to provide up to 12 inch crosscuts. An extra tall Flip Fence offers maximum material support throughout the cut whether miter or compound. The patented Flip Fence can be flipped, without the use of tools, to accommodate either miter cuts or compound cuts. The exclusive automatic retracting transparent lower guard maximizes blade visibility by sliding smoothly and quickly out of the line of sight during operation. Standard Equipment includes a 80 tooth Carbide Blade, blade wrench, Extension with stops, Vise, and Dust Bag.
