PowerStar PowerStar AE3.4 Point-of-Use Electric Water Heater

PowerStar AE3.4 Point-of-Use Electric Water Heater PowerStar point-of-use tankless water heaters are designer to provide an endless supply of hot water for kitchen, bathroom, and hand-washing sinks. There are three under sink models to choose from (dependent on desired temperature rise and flow rates). Common applications include: home, offices, warehouses, service stations, stores, and concession stands. Provides endless hot water for 1 sink at a time. Features Include: Delivers up to 3.5 gallons per minute 99% efficiency rating 5-year warranty on heat exchanger - 1 year on parts Saves space Installs vertically or horizontally All models must be hardwired Solid copper heat exchanger, copper-sheathed elements and tough plastic housing. High/low kW settings possible within most models No temperature/pressure relieve valve necessary (check local codes) Specifications: Voltage 120/110 Amperage 29 Kilowatts 3.4 Wire Size 10 GA Maximum Flow Rate at Given Temperature Rise Degree Rise @ .5gpm - 41øFDegree Rise @ .75gpm - 28øF Degree Rise @ 1 gpm - 20øF Efficiency 99% Weight 6 lbs. Dimensions 12.25" x 6.5" x 3" Water Fittings .5" male NPT Product Summary: Efficiency Installation Maximum Temperature Min. Flow Wire Size Voltage Kilowatts Amps 99% Multi-direction 135øF 0.50 10 GA 120 3.40 29

PowerStar PowerStar AE125 Electric Water Heater

PowerStar AE125 Electric Water Heater A perfect alternative to the electric tank water heater, PowerStar electric tankless water heaters are designed to replace a 40-gallon tank and provide endless hot water throughout the home. With two powerful and compact models to choose from-AE115 or AE125-it will fit just about anywhere and is built to last. Note: This product has specific electric installation requirements. Provides endless hot water for 1 major application at a time; Such as a Shower, Washing Machine, or Bath Tub Features Include: Delivers up to 3.5 gallons per minute 95% efficiency rating 10-year warranty on heat exchanger - 1 year on parts Solid copper heat exchanger - not plastic External temperature control knob Thermal cut-out for safety Flow sensor to provide a constant output temperature Electronic flow switch Provides an endless supply of hot water Weighs less than 25 pounds and fits virtually anywhere. Easy Installation! No temperature/pressure relief valve necessary (check local codes) Filter screen on inlet UL approved Important Electrical Requirements: Minimum service to home is 200 amps Energy Factor .95 Efficiency 95% Weight 22 lbs. Dimensions 15.25" x 15.5" 4.5" Water Fittings .75" male NPT Volts 240/208v Kilowatts 27/20kw Amps 120/101 (3 x 40 amps) Wire Size 8 gauge (6 conductors & ground) Phase Single Maximum Flow Rate at Given Temperature Rise 45ø - 4.0 gpm50ø - 3.7 gpm60ø - 3.0 gpm 70ø - 2.6 gpm80ø - 2.2 gpm gpm= Gallons Per Minute Note: The unit will not provide an output temperature above 131øF This model is not recommended in climates where average ground water temperature is less than 60øF Product Summary: Efficiency Energy Factor Wirse Size Voltage Kilowatts Amps Warranty 95% .95 8GA (6 conductors plus ground) 240 17.25 80 (2 x 40a) 10 Years